Tons of Used Parts …Chapter II

Now that the seasons have started their “miraculous mutations” or “swapping around” as we humble non poets would put it the temperature in Ontario has risen, albeit briefly, above freezing. This brief respite has presented me with the opportunity to start a task that I have not been looking forward to. As promised, some weeks back, I will be putting together an inventory of the “Tons of Used Parts” that I would like to get rid of. However, before I start this epistle there are some things which all interested parties should be aware:
First I should explain where all this stuff came from. Back in 1979 I started a business called “Precision Sportscar Servicing”. Precision as it became known was an early starter in the business of Healey restorations. When I started the only other company that I knew of was one called “Global Healey” and they vanished shortly after we started.In the days that Precision started the only sources for Healey parts were in the U.K. Moss hadn’t even thought of Healeys and some U.S. companies like MG Mitten and Victoria British were just dabbling. 1979 was a time when you could buy a rusted out Healey for less than $500 and really good ones were about $3000 so the demand for repro parts was fairly low as “good used” was the order of the day.

As the years went by we expanded to include MGs and Triumphs, although big Healeys were by far our largest volume. With very few exceptions all the parts we saved were for Austin Healey, Triumph or MG sports cars.Because parts were so hard to get, even though you could still get some from the dealer, I started buying up badly rusted Healeys and disassembling them for parts. When one does this the hardest part of the business is deciding what to keep and what to dump.

I started with 3 rules:

1. If a good quality reproduction of the part was available for less than it would cost to transform the part in question into a saleable item the used part went out.
2. If no reproduction of the part was available the part would be kept if it could be restored to saleable condition for less than what it would sell for.
3. If we had as many as we thought we would ever need only the best were kept.

Of course, as the years went by, the standards changed. When I started a “saleable part” was essentially one which could be installed with a reasonable chance that it would work and cosmetics were not a large factor also there was by no means the plethora of quality reproduction parts available in the early ‘80s that there is now.

Secondly these parts have been stored in three 40’ transport trailers for at least 15 years so they are not what one would describe as being “immaculately clean”, in fact exactly the opposite is true. Of late the raccoons have managed to gain access to the trailers and have eaten some of the cardboard boxes and left their calling cards in places so, don’t expect to arrive with a truck and just transfer a few boxes from one place to another. To be realistic transferring all the parts from where they are into another truck will probably take 2 people at least a full day and probably more, and they (the people) will get dirty to boot.
The parts that I have listed are just those that I could see reasonably easily and were of sufficient significance to list, there are more behind on the shelves. I have not included many other parts which are there like bell housings, gearbox cases, etc and, when we say a bin, this is usually a 20” x 24” x 10” deep fiberglass bin or in some cases a milk crate or similar.
That said, here is the list of the parts that are in the three trailers in absolutely no particular order.
Where possible the parts listed are linked to photos of the described items, I have not photographed everything because many are hard to get a good view of.

19 Steering wheels
3 100 oil pans
6 Hly 6 cyl oil pans
4 Other oil pans
1 bin Headlight rims
1 bin Windshield Washer Bottles, pumps jets and hoses
1 bin Headlamp inner rims
1 bin Tail light bodies
1 bin Plastic and glass lenses
1 bin Headlamp buckets and light units
8 Octagonal knock offs
1 bin Eared knock offs
4 “A” series oil pans
1 bin Sprite misc parts
1 TR6 gearbox case
1 bin Oil filter housings
1 Jaguar “E:” air filter assy
1 bin Misc external mirros
3 bins NOS Tie rod ends, king pin kits QH
1 bin Lucas electrical misc
1 bin Lucas column switches
3 bins Lucas distributors
1 bin Lucas scroll type horns
½  bin Wheel cylinder bodies and adjusters
3 bins Master cyls
2 bins Healey side shift transmission parts
1 bim Kangol seat belts manual and retracting
1 bin Jacks and handles
30 Rad fans
50 Wiper motors and drives
5 bins TR7 stuff misc (yuck)
10 Flywheels
4 Backplates
12 Rocker covers
2 bins Lucas horns
6 bins Healey 22 & 28% overdrive parts
2 Jag 6 cyl pans
2 Jag 6 cyl cam covers
1 bin Jag6cyl engine parts
2 bins Healey 100 engine parts
1 Healey 6 crank recon
1 bn Fan motors (not Healey)
21 Steering racks “B” TR, Sprite, Spit etc
10 Steering columns
½ bin Healey seat tracks
1 bin Healey heater parts
1 bin Healey over riders
1 bin Healey bumper mounts
1 bin Healey internal door parts
1 bin Lucas voltage regulators Healey
1 bin Misc small Healey interior parts
1 bin Healey bonnet parts
1 bin Healey windshield parts
1 bin Healey 100 engine mounts
1 bin Healey 6 engine mounts
1 bin Healey door hinges
1 bin Healey relays and switches
2 bins Healey 6 pistons and rods
1 bin Misc Healey brackets
2 bins Healey 6 engine parts
20 Crankshafts (Most Healey 6)
20 Cam shafts “
1 Diff center healey 3.9
1 bin Healey rear axle parts
2 bins Healey steering arms and rods
1 bin Healey steering idlers and s box parts
2 bins Healey front susp parts
1 bin Healey rear axle small parts
1 bin Healey brake shoes
1 bin Healey fuel system parts except carbs
1 bin Healey over riiders
1 bin Healey misc small body parts
1 bin Healey brake control parts
35 Healey roadster cockpit combing sections
1 bin TR6 body brackets
2 bins NOS TR6 single pulley water pumps
1 bin TR6 lamps
1 bin TR6 interior parts
1 bin TR6 wheel centers
1 bin TR6 electrical parts
2 bins TR6 half shafts and hubs
2 bins TR6 misc body parts
2 bins TR6 gearbox parts
1 bin TR6 front susp parts
1 bin TR6 brake controls and brakes
1 bin Healey BN1 gearbox parts
1 bin TR3-4 misc
1 bin TR 3-4 body parts
2 bins TR3–4  Susp parts
1 bin TR 3-4 Engine
1 bin MGA mech misc
1 bin MGA body exterior
1 bin MGB door parts
3 bins MGB engine parts
2 bins MGB front susp parts
19 Top frames
1 E Jag air filter case
5 Late Spit ½ shafts w hubs
1 bin MGB gearbox parts
1 bin MGB hubs some wires
1 bin MGB rocker shaft assys
3 bins MGB exterior body parts
1 bin MGB air cleaner assys
1 bin MGB emission parts
½ bin MGB seat rails and seat belts
2 big bins Caliper cores
1 pr MGB doors
1 BJ8 console
1 TR6 console
3 MGB single carb manifold sets
13 Misc twin carb inlet manifolds
110 approx Armstrong shock cores
1 pr Armstrong adjustable shocks early Healey
50 Wire wheel hubs
1 Jensen Healey carb set with manifolds and air filter
50 Misc Stromberg carbs and parts
8 bins Misc S.U. carbs and parts
1 pr Jensen Healey taillights
1 Morris Minor intake & exh manifold with carb & filter
5 Healey roadster grilles
4 TR6 air filter boxes
5 Healey BJ8 grilles & parts
1 bin Bugeye misc body parts (poor thing)
4 bins Spridget gearbox parts
1 bin “A” series pistons and rods
1 bin Spridget brake drums
2 bins Spridget body parts
2 bins 948 “A” series engine parts
2 bins 1275 “A” series engine parts
1 1275 midget carb & manifold set
1 bin Spridget front susp parts
6 Spridget ½ shafts
2 bins Brake shoe cores
1 pr TR7 front strut assys
12 Anti roll bars misc
1 TR6 short engine
1 TR6 carbs w manifold
1 bin Healey 6 cyl gearbox parts
5 Spitfire diffs
1 pr MGB ¼ lites
1 1500 “B” series engine (MGA)
3 TR6 ½ shafts and hubs
6 Healey diff center sections
4 TR6 diffs
5 Spridget diff center sections
1 bin Misc water pump cores
10 Transmission covers (tunnels) mostly Healey
1 Spit 1500 engine complete
5 1275 “A” series mostly complete
1 MGB 3 brg (bare block)
1 MGB 5 brg (bare block)
2 848 “A” series short engines
3 “A” series blocks
4 Revolution wheels MGB need polishing
2 Sprite smooth case gearboxes
2 Sprite ribcage gearboxes
3 MGB 3 sync gearboxes
6 MGB 4 syncro boxes
2 Healey side shift boxes OD
5 Healey center shift boxes OD
1 TR8 automatic transmission
1 TR7 automatic transmission
3 TR7 4 speed gearboxes
2 TR6 gearboxes
2 Spitfire early gearboxes
1 TR IRS rear trailing arm LHS
1 Jaguar cyl head
20 Lucas sealed beam units (working)
1 Raccoon (may have left)
1 bin Healey 100 windshield parts
1 bin Healey 100 heater parts
1 TR6 cyl head
6 Healey disc wheels
1 bin Healey controls parts
4 MGB windshield assys
2 Mini 10″ wheels
1 GT6 1/2 shaft
4 TR7 Wheels
1 TR4 steering wheel
4 Late Spridget windshield assys
1 late “B” rear bumper cover
1 pr BN1 rear brake assys
5 TR250 solid wheels
1 bin Spitfire headlamp surrounds
2 TR6 consoles
1 bin BN1 gearbox parts
4 bins Spitfire body misc
2 bins Old radios & speakers
3 bins Old harnesses (for parts)
1 bin Healey 100 carbs & manifolds
30 (approx) Alternators
1 bin Mini parts misc
5 Healey 100 distributors
1 bim Mini gearbox parts
60 (approx) Starters
30 (approx) Generators
1 bin Healey 100 engine covers
1 bin Spitfire lamps
1 bin Healey 100 wiper motors, drives and air filters?
3 Healey 100 flywheels
1 pr TR6 rear suspension trailing arms
7 Buick (Rover) V8 heads
1 bin Small speedos
2 pr Spitfire rear 1/2 shafts w hubs
3 bins 2″ gauges & parts
1 bin Spitfire trim rings ans hub caps
15 (approx) Inlet manifolds
2 bins Spitfire dash parts
1 Austin Gypsy engine (AH100)
4 Healey 6 cyl radiators
2 bins Spitfire engine parts
40 (approx) Radiators (other)
1 bin Spitfire brake and clutch parts
30 (approx) Exhaust manifolds
1 pr Healey 100 front spindles (BN1)
1 MGB 18GA engine (3 brg) rear
3 pr BJ8 wood dash panels
2 Healey 100/6 block (std bore)
6 Spitfire upper steering column covers
2 bins Healey 100 engine internals
30 (approx) Cyl heads misc
1 Ford Anglia 997 c.c. engine
2 Rover (Buick 215) bare blocks
1 Healey 100 crankshaft (lightened)
1 Buick 215 (Rover 3500) bare engine
1 Healey 100 grille + spare rim
1 Buick 215 (Rover 3500) short engine
1 MGA fuel tank
3 Triumph Spitfire engines
3 Healey 100 exh manifolds
1 bin Lucas switches misc
2 Healey 100 drive shafts
40 (approx) Brake drums
1 bin Healey 100 water and oil pumps
1 bin Healey 100 brake parts
1 bin Healey 100 gearbox parts (BN1)
1 bin Healey 100 brake and suspension parts
2 bins Healey 100 gearbox parts (BN2)
6 Spitfire 1500 diffs
20 Healey brake back plates
4 Healey 100 Radiators
1 Rover 3500 EFI engine
2 Spridget 948 c.c. engines
1 Early Healey 3000 engine
3 TR3/4 engines
1 MGB 5 brg block
3 TR7 engines
3 Spridget 1275 engines
2 GT6 engines
1 MGB 3 brg engine (GA)
1 Spridget 1100c.c. engine (10CC)
1 MGA 1500 block
1 Healey 3000 MkIII engine
1 MGB late engine (18V)
1 MGB late block (18V)
1 MGB early 5 brg engine (18GA)
1 TR6 engine
3 Healey 100 engine blocks
2 TR3 Steering boxes
5 Spridget smooth case gearboxes
1 Healey 100 gearbox (BN1)
1 Spitfire gearbox (early)
3 Spitfire gearbox (late)
10 Healey overdrive units
3 TR7 4 speed gearboxes
3 TR7 5 speed gearboxs
1 Jensen Healey gearbox
3 TR6 gearboxes
5 Healey diff centers 4.11/1
1 MGB overdrive unit
1 Overdrive unit (Alpine?)
1 BN1 overdrive unit
20 (approx) Healey steering boxes
2 TR 2/4 gearboxes
1 Healey sideshift gearbox
1 Morris Minor Gearbox
2 TR6 bonnets
1 TR7 bonnet
1 Late Spit L door
2 Early Spit boot lid
12 MGB boot lid
1 TR7 R door
2 Spridget rad cradle
12 Misc bumpers
2 Grease guns
1 Spridget R front susp unit
4 pr Healey conv 1/4 lite assys
10 pr Misc 1/4 lite assys
40 (approx) Door glasses
26 Side screen frames
10 Rear 1/4 windows
25 Windshield assys misc
8 Windshield glasses misc
20 Fuel tanks misc
25 Dashs misc
50 Driveshafts misc
20 (approx) Front suspension units misc
3 TR6 rear 1/2 shafts
40 (approx) Rear axle 1/2 shafts misc
6 Healey seats
1 pr Healey 6 cyl front inner fenders
1 MGBGT rear hatch NOS
4 Healey parcel trays
1 TR3 spare wheel cover
1 MGBGT rear seat cushion (black)
1 MGBGT rear seat cushion black
1 MGA R door
5 MGA L door
1 TR6 Grille & surround panel
4 BJ8 R door (late)
4 BJ8 L door (late)
2 TR3 L door (short)
1 TR3 R door (short)
1 Sprite MkII bonnet
1 Alpine bonnet
3 Healey 100 L door
6 Healey 100 R door
1 BJ8 R door (early)
1 BJ7 L door
9 6 cyl Healey roadster R door
4 6 cyl Healey roadster L door
3 TR6 L door
2 TR6 R door
2 GT6 rear hatch w glass
5 Spridget boot lid
2 TR3 Boot lid
4 Healey 100 boot lid
17 Healey 6 cyl boot lid
6 Healey 100 front shroud
2 Healey 6 cyl conv front shroud (early)
11 Healey 6 cyl roadster front shrouds
20 Healey 6 cyl bonnets
5 MGA bonnet
2 Sprite I R door
1 BJ8 conv gutter
2 MGB bonnet
12 Healey 6 cyl 4 seat rear shrouds
2 Healey 6 cyl 2 seat rear shrouds
4 Healey 100 rear shrouds
1 BJ7 rear shroud
1 Healey 100 Bonnet
4 Late Spridget L door
4 Late Spridget R door
14 Healey 6 cyl L rear wing
2 Healey 100 L rear wing
7 Healey 6 cyl R rear wing
1 Healey 6 cyl roadster R front wing
3 Healey 6 cyl roadster L front wing
1 TR3 R rear wing
1 TR3 L front wing
3 Healey 6 cyl conv L front wing
3 Healey 100 L front wing
1 Healey 100 R front wing
20 (approx) Fuel tanks various
1 Spridget L front wing
2 Spridget R front wing
1 MGA R front wing
1 MGA L front wing
1 MGB R door (early)
1 TR6 L front wing
1 Healey conv f shroud (rear 1/2)
1 TR7 boot lid
1 Healey 6 cyl 2 seat battery door
1 TR3 Spare wheel cover
1 Healey 6 cyl front shroud lower section
1 Spitfire 1500 R door
1 Spitfire 1500 L door
1 MGB L door
40 approx Wire wheels (we have thrown out 100s)
1 Sprite I bonnet (rough)

About Michael

Who is this guy? Born in New Zealand some time back. Went to Maori Hill Primary School then Kaikorai Valley High before joining the RNZAF and an Airman Cadet in 1968. Graduated 1972 with an NZCE in Aeronautical Engineering. Then embarked on the typical Kiwis "Big Trip Overseas". Got to see quite a few places, and spent a while in the U.K. "home" as it was refered to by many New Zealanders in those days, before travelling on to New York and then to Canada by bus!! This trip is presently on hold (has been for the last 34 years). Met my dear wife Judy not long after arriving in Ontario and we have been happily married since 1976. After travelling around New Zealand and the pacific in 1979 I started Precision Sportscar andfor the next 23 years grew the business and helped raise 2 boys Drew and Robin.
This entry was posted in Used British Sports Car Parts. Bookmark the permalink.

119 Responses to Tons of Used Parts …Chapter II

  1. Mitch Simmons says:

    Hello Michael,
    I was one of the first to contact you a while back,do you have a price in mind for all 3 trailers? lmk Mitch

  2. Michael says:

    Hi Mitch,
    Many thanks for your note. Indeed you were among the first to contact me regarding the parts I have for sale. There has been considerable interest both through blog postings and directly via e mail.
    Obviously I want to realize as much as I can from this collection but, until such time as I am able to fully describe what is there, prospective purchasers will not be sufficiently informed to make realistic offers.
    What I’m going to do is continue with the inventory, including as many photographs as possible, then ask for written offers to be submitted before a particular date.
    Barring any unforeseen problems I anticipate that I will have the inventory process completed by the end of this week.
    Again thanks for your interest I trust that you will agree that the process that I’m proposing will be fairest to all.

  3. Gary Briggs says:

    Hi Michael-

    I am interested in 3 sets of Kangol 3 point static seat belts. Do you have those, and if so, will you sell them separately, or are you only interested in selling the entire inventory as a lot?
    Gary Briggs

  4. Harry Gunsch says:

    Hello Michael,

    I noticed the parts you have for sale Do you have for sale maybe a trafficator.hornpush switch for a non adjustable steering wheel for an Austin Healey

    I also noticed some chrome parts like the horizontal grill of the 100/6 3000 models can you give me an indication what they will cost

    Kind regards

    Harry Gunsch

  5. James says:

    Since you have made it plain that you do not want to part out individual parts, will you make available, with the consent of the final purchaser of course, that individuals contact information? He/She will have some instant sales by the looks of it.


  6. Michael says:

    Hi James, absolutely, BUT I will not be selling any of the parts to individuals until a decision is made regarding the future of this inventory.

  7. Sam Marble says:


    I really need a good front shroud for an early 1 light BJ8. I notice you list two. I know you want to sell the lot but if you change your mind let me know.

  8. Olin Brimberry says:


    I need a BN4/BN6 sideshift gearbox w/ 28% OD. Please forward my request to the person purchasing your goodies. Good luck with the sale


  9. Jackie says:

    I need a jaguar strut. But, you don’t have them on the list. Do you have another set of parts for sale? I hope you have them. I’m having a hard time searching for a cheaper used one with almost new condition. But, new would absolutely be even better in case there is.

  10. Russ C. says:

    Hi There Michael;

    I`m looking for an E-Type, Series I or II Horn Push: Condition is Un-Important as I have a Great Looking Steering Wheel (My Motivation) that I want to hang on My Wall but No Horn Push: Again; Condition is Un-Important! Please advise Cost etc:

    Thanx, Russ C.

    PS: I live in NE PA (Pennsylvania); Zip Code for shipping purposes and cost is; 18330:

  11. Ima Flak says:

    Dear Sir;
    Please return our mascot from your “humane” trap to our offices at the Toronto Island Airport ASAP.

    Porter Airlines

  12. Michael says:

    Sorry, we don’t have a delivery service…you will have to collect. 🙂

  13. Hi Michael

    Great blog and I love the transporter. I am looking for an engine for my wife’s 67′ MGB. Do you have anything of this nature in your collection?


  14. Bill says:

    Hello Michael,

    Found your site while searching for parts for my 1958 TR-3A. Currently looking for heater parts, all of them, and an overdrive unit.

    Do you know if you have any of these items?


  15. Tadd says:

    Michael I’d like to know if you still have the 1500 complete motor? If so I’d like to know how it’s condition and much you’d want for it and if I could come pick it up, and where?

  16. Michael Hartfield says:

    Looking for a grill for a 1965 BJ8. I see some in the parts picture, do you still have such an item?

  17. Myron says:

    Hi Michael,

    Have you been able to find a buyer yet. Can you please pass on my email to whom ever purchaes your lot of parts. I’m looking for a few items for a ’65 Phase II BJ8. Specifically, a Rad Fan, Front light lenses, Steering Wheel (Adj) and a Boot Lid. Thanks for your help.

    Myron Jonzon

  18. Tony P. says:

    Looking for hard tops for a 100/6 2-seater Austin-Healey. Without the jump seats. Also, a series III XKE. Any help?

  19. Steve G says:

    what size are the TR7 wheels? 13 or 14″?

    I’m interested — photo avaialble?

  20. Lukas says:

    I’m interested in a smoothcase gearbox for
    1961 Midget (948cc).

  21. Looking for 2 rear fenders for a TR-4. Notice you have body paneld lidted, but could not see. Do you have any & how much?

  22. richard twedt says:

    hello, i am looking for an a-type overdrive for my 66 tr4a irs. thanks

  23. Chris says:

    Interested in left hand MGB door and MGB overdrive.

  24. Al Amato says:

    What a collection of parts!!! And I thought I had alot of stuff. I’m looking for a few items for my ’66 Sprite. Do you still have the wiper motors and if so how much are they. I’m also looking for three point non retractable seat belts. I’m not too worried about the condition of the webbing. I can get that re-done. It’s the hardware I need.

  25. Ken says:


    Are those Rover V8 heads Aluminium or Iron?

  26. Joachim says:

    I was wondering if you had the rover 3.5 bellhousing lying around anywhere? The one that mates up to the LT77 5 speed?

  27. mike says:


    do you have a TR250 cylinder head for sale



  28. paul says:

    hi mike do you have passager front inner wing with the side panel for tr4 or tr250
    thank you

  29. anthony stinchcombe historic and vintage says:

    have you got a price for the collection yet

  30. Ben heinhuis says:

    Hello Sir,
    I am lookink for 2 rear fenders 1 left and 1 richt,also doors left and richt and trunk lid and hood also an convertible top bows and and richt front fender al for my healey 3000.
    Iff you have an compleet transmission incl the shift st
    ick i be also interested.
    Hope to here from you.
    Ben heinhui
    4104-232 str
    ph 604-534-4899.

  31. Dennis Suski says:

    Please let me know if you have an MGA exhaust manifold and if so how much it would be. Thank you, Dennis

  32. jo noble says:


    I’m looking for an original windshield for a 1959 Triumph Tr3a. If you have one available please let me know.

  33. Tim says:

    Just checking to see if you still have the two bins of TR-6 Gearbox parts listed above. (2 bins TR6 gearbox parts) If so how much $ ?


  34. Marvin Beaton says:

    I was wondering if you have any SU HS6 carbs, as I was looking into converting my TR6

    also do you have any OD (Over drive)parts that will fit the TR6


  35. Peter says:


    Noticed your list of parts and wonder if you still have the TR3 Left Front wing still around?
    Do you have a generator for a early 1954 100/4?
    Original “Austin of England” badge for the trunk.

    Thanks, Peter

  36. Harry says:


    In the tons of parts do you have perhaps a 2 seater Factory top for an Austin Healey for sale ?

    Look forward to your reply

    Kind regards


  37. Rick says:

    Hello Sorry,I just found your web site. I am looking for front,and rear fenders for a triumph tr3.And a raised hinge boot lid.Thank you.

  38. Hi

    i am interested in the overdrive for alpine?
    it must be a d type….


  39. Jim says:

    Hi Michael
    I need several parts for my BN2.
    Windscreen forward position foot on guard L&R required
    windscreen lower seal frame to body
    Chrome demister grilles
    Left front brake assy including backing plate and hub
    trunk hinges L&R

  40. Greg Mandas says:

    Do you have the front and rear exhaust manifolds for a 1965 austin healey bj8 with intact flanges.

  41. Nelson A says:

    Dear friend we are interested in an AUSTIN HEALEY 100-4 BN1 Gearbox if you have complete. Any way I can see that you have several bins with dissansembled parts what price are for this parts…


  42. Nick says:

    Looking for 1962 Triump TR3 fenders. both front and passenger side rear.


  43. Jess Power says:

    I am looking for an exhaust manifold for an austin healey 100/4 BN1.Do you have one? How much is it?

  44. Doug Bury says:

    Very interested in the following parts:
    BJ8 console
    Healey windshield parts

    Please provide the cost of these items to include shipping to Illinois and I will have my bank cut you a check.


  45. Adam says:

    I am interested in the buick 215 engine. can you contact me at 229-455-4317?

    Please provide cost of items and cost of shipment. Thank you for your help.

  46. Matt says:

    Do you have any of the original Kangol static seat belts? I have a 1970 MGB original 1 owner and need to replace the belts.

  47. Hello Michael – deep into total restoration of a ’57 100/6 Healey BN4 and trying to recreate a car identical to the works Healey 100/6 of the ’57 Mille Miglia.

    Fabulous project and we seem to be short of the following detail parts – hard to find of course –

    No1 is a 100/6 horn button wIth the “flash and a 6”.
    No 2 is a glass washer bottle – Type Trafalgar by John Sydney Ltd.

    A good set of side screens would be amazing, as I do not want to get into the reproduction market.

    And I thought after a lifetime in commercial aircraft that some aircraft parts were hard to source………

  48. Emilio says:

    Dear Michael,
    for an Austin Healey 100 BN1 LHD,year 1953, vin n°
    we will be very interested in obtaining this g/b part,considering it helpfull for our project end.
    Is of vital importance the needed item should be exactly part n° 031-337(from moss catalogue).
    We are also interesting in having wiper motors(2) for LHD car.

    We stay
    assuring you fast reply with cash.


  49. Scott says:


    I am curious if you are still selling there parts?

    I am in need of a soft top for a 62 sprite and 2 hood hinges. Do you have lots of parts left for this car?



  50. verner grebart says:

    Hi Michael,
    Interested in your carbs and parts, if it is HD8 for A.Healey BJ8.
    Looking forward to hearing from you,
    Best wishes
    Vwerner Grebart

  51. Alex Randall says:

    Hi Michael,
    I own a ’54 100/4 and am looking for a Smith’s speedo in KPH and a tach. Do you have such a thing?
    Look forward to your response.

    Thanks alot,


  52. beugin daniel says:

    hi, I’m looking for a front gearbox tunnel extension for a BN2(4 speed side change)Thank you for your answer
    Best regards
    Daniel Beugin, France

  53. jeremy says:

    Do you still have your healey parts available please
    thank you,Jeremy

  54. Greg Mandas says:


    I’m on the hunt for the bracket that mounts to the transmission tunnel and hold the console in place. ’65 BJ8.

    Thanks, again,


  55. allen greco says:

    mike, do u have a distributor for a 100 4 m 1955, thanks. if so how much

  56. Adrianne says:

    Mike, do you have a top frame for a TR4A? If so, how much?

  57. brad says:

    looking for a set of NOS or good used rear seat pans for BN4 or BT7. also need a 2 seater rear shroud for a 3000.

    712-944-4900 is you have anything to offer.


  58. John says:

    Do you have a block for a 1955 MGA 1500?
    State price thanks and regards

  59. Bradley Grambo says:

    Good day,
    I’m looking for a 1953 Ausitn Healey BN1 transmission case. Brad

    • wolf says:

      Hi Brad , I have a compete transmission for a 100-4 BN1. I think the model year was 55, but assume the BN I’s all had the same transmission.


  60. Scott says:

    I need a front and rear shroud for BJ8 Phase II. Any help appreciated!


  61. Joe says:

    HI Michael,
    Need all hardware,clips,fasteners,rail piece, for a BJ7. To reinstall a proper non zippered original style soft top. These are the pieces that hold the rear window in place and are attached to rear most bow of the top frame, car had been retro fitted to zipper style and the parts are not with the frame ,please let me know. Thanks.

  62. Jeff says:

    Michael, do you have a good set of wheel trim rings for the 13″ Spitfire wheels? If so, are you able to ship to North Carolina? Thanks!!

  63. Joe says:

    Do you have for a BJ7 early car a set of left & right door upper trims or armrest as some people call them, the “rounded shape style” not the triangulated shape or late 63 BJ7 BJ8. If you need I can send a picture to identify the shape. Thanks


  64. Kenneth Too says:

    Hi Michael,
    I’m looking for a TR3 clean windscreen.

    Many thanks,


  65. Brian Fenn says:

    Do you have any Triumph TR3 engines for sale?

  66. Hello Michael, I need right front axle swivel assembly, looks like one in photo of the bin of AH front suspension parts. Still have those? I have a 1960 AH 3000 BT7. Thanks, Scott

  67. vince says:

    Michael i have a bj8 could you please price me, mauin grille surround & cowl . bonnet grille top cowl. r/h door hinge. r/h idler arm. l/h rear wing. thankyou, i wait for your reply. I am in Sydeny australia

  68. Greg says:

    Hi Michael,

    Do you have any Austin Healey 100-6 speedo’s and other gauges available still? Also looking for SU HD6 Chamber/Piston assembly 2 of them are needed, and a OD main shaft?

    Thanks for your time,


  69. Martin says:

    Hi There,
    Looking for a BN1 gearbox, do you still have that one available? I only need a lay gear (yeah, right!) with part number 1B3694.


    • Hi there! I am looking for a BN1 reverse idler gear. Also any A type center cases, planetaries, thrust ring housings, other parts etc.

      I have a BN1 gearset and individual gear for the 1B3694 cluster gear. Anybody help??!! thanks! John Esposito

  70. Mark Eaker says:

    Hi Michael,

    My father and I are restoring a 1958 TR3 small mouth. We are in need of both rear wings as the original ones are in very bad shape. Do you happen to have a these or know who to contact to purchase a solid set of rear wings? Thanks


  71. Antoine says:


    I am looking for a 100/4 engine, BN2 and an MGB GA or G Block (MGB 3 brg engine)
    Are you shipping parts to Europe?

  72. Alf says:

    I need a transmission tunnel for a 1955 Austin Healey 100-4 I can be reached at 918-446-7000 JRP speedway ask for Alf thank you for your time

  73. David Ferry says:

    I’m looking for loads of parts for my Healey 100 4. Engine and BN2 4 speed gearbox would be good, along with a transmission tunnel for the gearbox too.
    Thanks for your time.

  74. John Burton says:

    Hi I’m looking for a healey diff to suit the 3000 series, any ratio will do as I’m going to rebuild it using new gears. What do you have available and how much?

    Thx Johnb

  75. rich says:

    I am looking for front shroud for 65 austin healey bj8 single light

  76. robert says:

    Please advise contact email as I want to buy a rebuilt MKIII waterpump

  77. mark kriwinsky says:


    I’m restoring an April build date bn2. I need a correct date coded generator ( before 5 of 56) a correct HA12 coil with screw in posts and a correct igniton switch body with screw in posts. PLease email me at

  78. John Mosey says:

    Hi do you still have any parts. I have a BT7 which is partless. So if you have any parts to sell please let me know R John

  79. rich says:

    Mike looking for front driver side fender outer 609-226-3695

  80. rich says:

    austin healey bj8 front fender outer sorry lousy discription. Front outer fender bj8 609-226-3695

  81. Joe says:

    Hello Michael,
    Do you have a set of 4 hubcaps Rostyle model for a TR250, must be 16 to 16.5 inches across, edge to edge. The ones with the 5 fake nuts and black painted spaces. Please let me know. Thanks


  82. Leroy says:

    Hi There

    I need a front shroud for a 100-6 BN4?

    Dont know if there is any chance you can guide me in the right direction?

    Many thanks


  83. Mario Scicluna says:

    Hi Michael,
    I am looking for 1 (one) set X 6 pieces alloy cockpit capping for Austin Healy Sprite Mk1 ,do you happen to have and if yes please give me price with postage to Malta and what condition they are .I would be happy to see photos if you can send.
    Thanking you in advance
    Best Regards

    Happy Christmas.

  84. Andrew Robson says:

    Hello Michael, I have done the same thing with a lot of gt6 parts and misc other British stuff over a 22 year period of servicing them, albeit not quite as large as your stash but still very sizeable, two years ago I tried to find a home for all of it including the 11 complete cars for what had to be a bargain price, all I got were stupid offers from people, I hope that you had a better experience.
    I noticed that you were willing to sell parts off individually in the last posts, is that still the case and do you have a 100-4 BN2 bellhousing, front engine plate, and a front left wing.
    Thanks for your time,
    P.S. I am so glad I did not let them go at the time, I am now about to start going through the stuff properly and will start to sell it off to people who need it

  85. Pichir says:

    I need for my Jaguar Mk1 Model 1958 with motor 2.4 liters Standar left wheel I need:

    1.- Complit set of Connecting Rod (Less Bearings) part Nº. C.8417
    2.-The complit set of pistonsin standar size .part Nº. C.8633
    Note: part number in the parts catalog
    can you tell me the price with shiping to Mexico City Please.

  86. james watson says:

    I need a complete windshield frame for a 73 a h 3000 my ii. Don’t need glass just frame in good condition. You have one?

  87. Klim Geraedts says:

    Hello, I am from the netherlands and wonder of you also ship parts to Holland. I am searching for some parts for a Austin Healey 100-6 BN4 Longbridge. In your upper parts list I have noticed a left side screen from in particular this type of Healey which differs from later 100-6 and 3000 types. If I could get your email adress I would like to send you some pictures from the frame and list the other parts which I am searching for. Do you ship to Holland and could you send me the price of this left side screen please ?

    Thanks in advance and best regards,

  88. Stan says:

    I’m looking for gears for a bn1 3 speed transmission I need the lay gear and 1st gear

    • Michael says:

      Hi Stan,
      I have a limited supply of BN1 parts but you will need to be more specific about your gearbox as there were 2 different laygears for that box.
      The earlier gear was part#1B3481
      and the later one (after gearbox #5145) was 1B3693
      However very often later gears were installed in early boxes so it is essential that you check which laygear is in your box before ordering parts.

      Michael S

  89. Al Accurso says:

    Seeking a good working BN1 distributor with drive dog. Some one on your website said they were looking for a BN1 exhaust manifold, I have one. Will trade for distributor.
    Al Accurso Concord, California USA
    925 766 6100

  90. Paul Chaplin says:

    I’m looking for a pair of door hinges for a Healey 100/6 wondering if you have a pair and could ship to UK ?

    Regards Paul

  91. Florian says:

    Hi Michael,

    I stumbled upon your Web page and was wondering whether you had a front shroud available for a BJ8 Austin healey 3000 (early or late is fine).

    Thanks !

  92. Ernest says:

    Hi Michael,

    I am looking for a Trafalgar Washer Pump for my 100/6 Healey. Do you have this one?


  93. hintzt says:

    Dear Sir
    I m searching a gearbox cover for a healey 100 BN2 side change 4 Speeds
    Is it available?

  94. Rick Adkins says:

    I am looking for a passenger side front fender, a side shift trans tunnel and a set of good leaf springs for a 59 BN6… Any chance you have any of this?

    Thanks much,

  95. Adrian Nixon says:

    Hi, i realise its a long itme since you stared selling your parts, just making contact ot see if you have any AH BN1 windscreen parts, i recently purchased the car with a later windscreen and frame fitted, i am trying to put it back to original condition.

    Adrian Nixon (UK)

  96. Frank Mollo says:

    hi, I am looking for a type A overdrive unit, series 22/3XXX/ unit as indicated on the brass laycock i.d. tag, as fitted to a big healey. Thanks Frank

  97. Andrew Brims says:

    I am looking for a BJ7 lay gear , AEC3649 in good shape,
    Also a TR4 transmission including Type A Laycock overdrive
    Can you advise by email where I might find these parts if you do not have them yourself
    Tx in advance

  98. Robert says:

    looking for a set of door hinges for a 57 AH 100-6

  99. manuel sanchez says:

    Hi Michael

    You don’t hapen to have a lay gear for a 1955 Aaustin Healey BN1 3 speed gearbox, pn. 1B3693 in your tons of used parts?

    Regards from Portugal.

    Manuel Sanchez

    • Michael says:

      Hi Manuel,
      I have only one very good used 1B3693 in stock. $US 765 + shipping.
      Unfortunately I can’t get a shipping rate at present because the Canada post web site is down (again) but the package weight is 1.4kg and dimensions are 21cm x 21cm x 15cm.


    • Michael Salter says:

      Manuel, sorry but I didn’t notice your enquiry.
      Please contact me at if you are still looking. I probably have one.

  100. John says:

    Hi Michael –
    Looking for a glass washer bottle lid only for early 100-6.

  101. Augusto Costantini says:

    Hi, I am looking for a steering wheel and control head for a BN2, also in bed condition.
    Do you have any? Thanks. Augusto

  102. Adam Booth says:

    Could you please advise if you have a good set of door hinges for a BJ8

Leave a Reply

Your email address will not be published. Required fields are marked *